Is this your business? Claim this free listing to add your details, photos and start receiving enquiries.
Claim this listing4.6
93 Google reviews
1–2 days
Typical install time
£7,500
BUS grant amount
A Class Plumbing & Electrical Ltd is an MCS certified air source installer based in Lancashire. They are registered with the Boiler Upgrade Scheme, meaning they can help you claim up to £7,500 towards your installation.
Based in Lancashire, FY2 0JW
Areas served:
4.6
93 Google reviews
Based on verified Google reviews
Paul Clegg
A Class fitted a replacement boiler for my 76 year old mother within 5 days of making contact. John the owner even left her with some heaters while waiting for the new boiler to arrive. The workmanship was of a high standard. The lads who fitted the boiler were professional and polite. They left the room spotless on completion. I can't praise this company enough. I would highly recommend.
Alex Holme
I have used A Class for a number of years and have always been incredibly happy with the level of service provided. Today Dan and Zack came out to relocate and replace two radiators. The job was not as straightforward as first expected but they were super helpful - and positive that they could get it sorted! As always, I’m really impressed with the work they completed and would highly recommend A Class to anyone looking for a reliable plumbing company.
John Sutcliffe
Really impressed with the service of solar and powerwall installation, communication has been on point from start to finish, and the guys were friendly, courteous and professional, they are grafters, would happily use Rhys and his team again for future works
Tim Kilner
I have recently used A-Class Plumbing & Electrical Ltd to install a new PV system including battery storage & associated inverter’s. In summary I am very pleased with my install, my A Class experience and I highly recommend them. A Class was recommended to me a by a neighbour who had a PV solution installed early 2023 and sang their praises. My initial contact with John ( the owner) was excellent, he is very knowledgeable (20 years of PV install experience) and helped guide me through the design of a solution that suited my house, and my aspirations. As we traveled through this process I saw the passion that John has for green energy and a desire to create a solution the met my needs. The design went through a couple of iterations for both components and price, and once we received the G99 approval it was full steam ahead. The scaffolding (Wyre Scaffolding) was excellent, the best we’ve had; it was both very sturdy and very Safe). The install onto a slate roof (29 panels) and into my loft (2 inverters, 4 batteries) took just 5 working days, and I met 6 members of the A-Class team. There were typically 3 on site at any time. All were very amiable, professional, hard working, Technically very competent, and took great care in ensuring their element of the install was undertaken to the very best of their abilities. Each step was photographed to provide visibility of the workmanship across the A-Class team, and there was a solid desire to create a solution in a very neat and tidy fashion. Dan, the on site team leader, and professional electrician kept me in the loop all the way through the install to ensure I finished up with the install I desired. He was excellent in this role. In conclusion I have really enjoyed the experience of the A-Class team, they are exceptionally good, and I can not recommend them enough. If you are after a PV / Battery install, look no further. They really are very good, I cannot think of anything they could have done better, other than sourcing some sunny weather on my first day of becoming a Power Generator. Many thanks A Class. A pleasure to write this review
Barry Williamson
A Class Plumbing and Electrical found a serious fault with our condensing central heating boiler during its annual service. This problem goes back to its inadequate (to say the least) installation by Discount Domestic Heating (DDH) of Cleveleys. The hot and acidic condensate from the boiler should be conducted along a plastic pipe directly to the sewer, but as the boiler is on the first floor and not on an outside wall, DDH had simply connected a short pipe to an old metal overflow pipe. This stuck out of an outside wall, dripping onto whatever was on the drive below – tarmac, people, car, front door. A potential hazard, which could ultimately weaken the building’s foundations. A Class immediately agreed to remedy this dangerous situation. Within a week Paul and Curtis had installed the correct plastic condensate pipes beneath floorboards, across a room, through an outside wall and safely down a pipe to an external drain. This was inevitably very disruptive for a short time, but they left the inside of our home even neater and tidier than they found it. Excellent work! This is our earlier review of their very efficient installation of new radiators Excellent is an over-used word but it isn’t adequate in describing the service A-Class Plumbing gave us. We learned a lot from Tony when he made an initial visit to measure and advise on replacements for our five aged radiators. Days later, Paul and Elliot arrived promptly to work well together until the job was done and all the rubbish was removed. The improvement in the heating system was immediate and very welcome in the next few days of frost of ice! DDH had failed to leave keys to open the water filter when they installed the Bosch Worcester boiler, but Paul soon had it open and cleaned, as well as flushing the whole system and adding a good dose of inhibitor. They really cared! Barry and Margaret Williamson, Thornton
Showing 5 of 93 reviews. View all on Google
We are MCS‑certified and registered with an approved consumer protection/competent person scheme, which is essential for quality assurance and to access grants like the Boiler Upgrade Scheme (BUS).
We carry out a detailed home assessment, including property type, insulation levels, existing heating system and available outdoor space, to confirm whether a heat pump is a good fit.
We design the system using a heat‑loss calculation for your home, then match the correct kW size and model (for example, air‑source vs ground‑source) so it runs efficiently and reliably.
Our fixed quote clearly lists the heat pump, cylinder, controls, labour, scaffolding (if needed), electrical work and any radiator or pipework upgrades, so you know exactly what you’re paying for.
Yes, as an MCS installer we can confirm your eligibility, apply for the BUS grant (worth up to £7,500) on your behalf and deduct it directly from your quote.
A typical air‑source heat pump installation takes around 2–5 days, and we’ll agree locations for the indoor and outdoor units, manage any planning considerations and keep you informed each day.
After the heat‑loss survey, we’ll advise if any radiators, pipework, electrics or hot‑water cylinder need upgrading so the system can run efficiently at lower flow temperatures.
Modern heat pumps are designed to be quiet and must meet UK noise regulations; we’ll position the unit to minimise any impact on you and your neighbours and comply with local planning rules.
You’ll get manufacturer warranties on the heat pump plus our workmanship guarantee, and we offer ongoing servicing and support to keep your system performing at its best.
We’ll estimate your likely annual running costs and potential savings based on your current fuel type, insulation level and tariffs, using real‑world performance data rather than lab figures.
Boiler Upgrade Scheme
Up to £7,500
off your heat pump installation
This installer handles the full BUS grant application — deducted directly from your quote. No upfront payment needed for the grant amount.
Scheme open until 2028 — limited funding available
Check your eligibilityReady to get a quote from A Class Plumbing & Electrical Ltd?
Free, no obligation — we'll connect you directly