Is this your business? Claim this free listing to add your details, photos and start receiving enquiries.
Claim this listing1314 Renewables
5.0
2 Google reviews
1–2 days
Typical install time
About 1314 Renewables
1314 Renewables is an MCS certified air source and exhaust air installer based in Stirlingshire.
Coverage area
Based in Stirlingshire, FK16 6ER
Areas served:
Reviews
5.0
2 Google reviews
Based on verified Google reviews
Marion Eastaugh
I would like to give the boys from 1314 110% for the work they carried out fitting my air source heat pump, They arrived prompt on Monday morning and and worked solid for 4 days coming back on the 5th morning to make sure everything was working o.k. Every night before they left they tidied up and on the 5th day the house was left clean and tidy they even hoovered the carpet before they left. Everyone from Ross and Thomas who came and did the survey and talked me through the procedure to Dillon, Jacob and Fraser who fitted the pump and radiators they were all friendly and answered any questions I had as they went along. Many thanks to you all Marion Eastaugh Fintry
Rebecca Turner
I received such a fabulous service from the guys at 1314. They worked their socks off over four days to install my solar panels, heat pump and battery and replace my storage heaters with a wet system - without leaving a trace that they'd been here!! They overcame any little problems swiftly and thoughtfully, communicated everything with me and talked me through the tech until I understood it (no mean feat!) I'm super grateful and would recommend 1314 to anyone considering the move to renewable energy. Thanks guys!
Frequently asked questions
How do I know you’re properly qualified and certified to install heat pumps?
We are MCS‑certified and registered with an approved consumer protection/competent person scheme, which is essential for quality assurance and to access grants like the Boiler Upgrade Scheme (BUS).
Can you tell me if a heat pump is actually suitable for my home?
We carry out a detailed home assessment, including property type, insulation levels, existing heating system and available outdoor space, to confirm whether a heat pump is a good fit.
What type and size of heat pump will you recommend for my property, and why?
We design the system using a heat‑loss calculation for your home, then match the correct kW size and model (for example, air‑source vs ground‑source) so it runs efficiently and reliably.
What will the full installation cost be, and what’s included in your quote?
Our fixed quote clearly lists the heat pump, cylinder, controls, labour, scaffolding (if needed), electrical work and any radiator or pipework upgrades, so you know exactly what you’re paying for.
Can you help me access government grants like the Boiler Upgrade Scheme?
Yes, as an MCS installer we can confirm your eligibility, apply for the BUS grant (worth up to £7,500) on your behalf and deduct it directly from your quote.
How much disruption should I expect during installation, and how long does it take?
A typical air‑source heat pump installation takes around 2–5 days, and we’ll agree locations for the indoor and outdoor units, manage any planning considerations and keep you informed each day.
Will I need to replace my radiators or upgrade anything else in my home?
After the heat‑loss survey, we’ll advise if any radiators, pipework, electrics or hot‑water cylinder need upgrading so the system can run efficiently at lower flow temperatures.
How noisy is the outdoor unit and where will it be installed?
Modern heat pumps are designed to be quiet and must meet UK noise regulations; we’ll position the unit to minimise any impact on you and your neighbours and comply with local planning rules.
What warranties, servicing and aftercare do you provide?
You’ll get manufacturer warranties on the heat pump plus our workmanship guarantee, and we offer ongoing servicing and support to keep your system performing at its best.
What running costs and savings can I realistically expect compared to my current boiler?
We’ll estimate your likely annual running costs and potential savings based on your current fuel type, insulation level and tariffs, using real‑world performance data rather than lab figures.
Ready to get a quote from 1314 Renewables?
Free, no obligation — we'll connect you directly
Similar to 1314 Renewables
