Is this your business? Claim this free listing to add your details, photos and start receiving enquiries.
Claim this listingMollison HPR Ltd. t/a Mollison HPR
5.0
3 Google reviews
1–2 days
Typical install time
About Mollison HPR Ltd. t/a Mollison HPR
Mollison HPR Ltd. t/a Mollison HPR is an MCS certified air source installer based in Angus.
Coverage area
Based in Angus, DD1 5DD
Areas served:
Reviews
5.0
3 Google reviews
Based on verified Google reviews
Adrian Gray
I have used Scott from 2014, when I installed a GSHP. Scott was very diligent and able to guide me through the whole process. I am pleased with the performance of the GSHP, ideal for my rural location. Since then I have used Scott and his team for all my plumbing needs. This has included two bathroom refurbishments and all the heat pump servicing and maintenance. I am confident that I will always receive first class workmanship and quality.
Shona Hendry
Scott and his team have done a few jobs for us in the last few years . They installed our heating and solar panels and were very friendly, efficient, tidy and punctual. They continue to maintain and service the above yearly . Occasionally I have required some additional help with the heating , ie a new thermostat on one of the radiators and assistance with the heating controls and Scott has personally provided the help required promptly. I would definitely recommend their services.
D. Sullivan
Scott and his able assistant Terry made short work of a list of jobs relating to a combi boiler exchange. Taking out our 34 year old floor standing boiler and making good the wall behind to mount the new combi boiler on to. They both work efficiently and effectively to make the whole process as painless and unobtrusive as possible. Many thanks for your efforts and leaving the many new hatches required for the additional works requested well battened down. Cheers Scott we’ll be seeing you for the next round of upgrades.
Frequently asked questions
How do I know you’re properly qualified and certified to install heat pumps?
We are MCS‑certified and registered with an approved consumer protection/competent person scheme, which is essential for quality assurance and to access grants like the Boiler Upgrade Scheme (BUS).
Can you tell me if a heat pump is actually suitable for my home?
We carry out a detailed home assessment, including property type, insulation levels, existing heating system and available outdoor space, to confirm whether a heat pump is a good fit.
What type and size of heat pump will you recommend for my property, and why?
We design the system using a heat‑loss calculation for your home, then match the correct kW size and model (for example, air‑source vs ground‑source) so it runs efficiently and reliably.
What will the full installation cost be, and what’s included in your quote?
Our fixed quote clearly lists the heat pump, cylinder, controls, labour, scaffolding (if needed), electrical work and any radiator or pipework upgrades, so you know exactly what you’re paying for.
Can you help me access government grants like the Boiler Upgrade Scheme?
Yes, as an MCS installer we can confirm your eligibility, apply for the BUS grant (worth up to £7,500) on your behalf and deduct it directly from your quote.
How much disruption should I expect during installation, and how long does it take?
A typical air‑source heat pump installation takes around 2–5 days, and we’ll agree locations for the indoor and outdoor units, manage any planning considerations and keep you informed each day.
Will I need to replace my radiators or upgrade anything else in my home?
After the heat‑loss survey, we’ll advise if any radiators, pipework, electrics or hot‑water cylinder need upgrading so the system can run efficiently at lower flow temperatures.
How noisy is the outdoor unit and where will it be installed?
Modern heat pumps are designed to be quiet and must meet UK noise regulations; we’ll position the unit to minimise any impact on you and your neighbours and comply with local planning rules.
What warranties, servicing and aftercare do you provide?
You’ll get manufacturer warranties on the heat pump plus our workmanship guarantee, and we offer ongoing servicing and support to keep your system performing at its best.
What running costs and savings can I realistically expect compared to my current boiler?
We’ll estimate your likely annual running costs and potential savings based on your current fuel type, insulation level and tariffs, using real‑world performance data rather than lab figures.
Ready to get a quote from Mollison HPR Ltd. t/a Mollison HPR?
Free, no obligation — we'll connect you directly
Similar to Mollison HPR Ltd. t/a Mollison HPR
