Is this your business? Claim this free listing to add your details, photos and start receiving enquiries.
Claim this listingPennine Electrical Solutions Ltd
5.0
9 Google reviews
1–2 days
Typical install time
£7,500
BUS grant amount
About Pennine Electrical Solutions Ltd
Pennine Electrical Solutions Ltd is an MCS certified air source installer based in West Yorkshire. They are registered with the Boiler Upgrade Scheme, meaning they can help you claim up to £7,500 towards your installation.
Coverage area
Based in West Yorkshire, BD5 8FH
Areas served:
Reviews
5.0
9 Google reviews
Based on verified Google reviews
Paul Schofield
Full rewire required at my dad's house. The house is to be rented. Pennine electrical brought the house up to current regs, fitting up to-date smoke alarms and extractor fans (where none were previously.) They added extra sockets and switches and even made good the floorboards after the work, repairing previously broken boards with new. Needless to say the lads cleaned up brilliantly after themselves (very dusty due to chasing brick and block internal walls) 10/10 service from start to finish, everything was efficient and smooth. I received all certificates prior to invoice and invoice was very easy to pay. Highly recommend
Peter Bentley
Excellent install, despite discovering problems with my existing roof which was also replaces efficiently. System works great and is already saving over £150 per week and it’s only January !! Phil and his team are great, responsive and were great throughout.
Christy Moore
Brilliant, very responsive, on time, work done to an excellent standard. Would highly recommend
Brad Booth
Phil and the lads have been outstanding on my home renovation. No job was too big or too small, they managed to sort out some wiring that had been done incorrectly previously and all the lads had a ‘can do attitude’. They turned up when they said they would, worked around all the other tradesmen in the house and didn’t let me down once. The lads were always polite and tidied up after themselves (including taking their shoes off when working in clean areas, without even being asked!) I would 100% recommend Pennie to anyone who needed any electrical work doing. Thank you so much for the amazing job at my house!
Martin Poplawsky
Phil of Pennine Electrical visited on time to sort out an electrical fault somewhere within my central heating controls. After checking through my Thermostat, programmer, motor it traced back to a faulty 3port valve. He quickly fitted a replacement, tested it with his voltage tester machine. He made sure the radiators and water were getting hot as they should, cleaned up after himself very well too. He fault found and diagnosed and fixed in under an hour what 3 central heating engineers and another electrician could figure out in over 3 year's!! Outstanding service, will definitely be using him again.👍
Showing 5 of 9 reviews. View all on Google
Frequently asked questions
How do I know you’re properly qualified and certified to install heat pumps?
We are MCS‑certified and registered with an approved consumer protection/competent person scheme, which is essential for quality assurance and to access grants like the Boiler Upgrade Scheme (BUS).
Can you tell me if a heat pump is actually suitable for my home?
We carry out a detailed home assessment, including property type, insulation levels, existing heating system and available outdoor space, to confirm whether a heat pump is a good fit.
What type and size of heat pump will you recommend for my property, and why?
We design the system using a heat‑loss calculation for your home, then match the correct kW size and model (for example, air‑source vs ground‑source) so it runs efficiently and reliably.
What will the full installation cost be, and what’s included in your quote?
Our fixed quote clearly lists the heat pump, cylinder, controls, labour, scaffolding (if needed), electrical work and any radiator or pipework upgrades, so you know exactly what you’re paying for.
Can you help me access government grants like the Boiler Upgrade Scheme?
Yes, as an MCS installer we can confirm your eligibility, apply for the BUS grant (worth up to £7,500) on your behalf and deduct it directly from your quote.
How much disruption should I expect during installation, and how long does it take?
A typical air‑source heat pump installation takes around 2–5 days, and we’ll agree locations for the indoor and outdoor units, manage any planning considerations and keep you informed each day.
Will I need to replace my radiators or upgrade anything else in my home?
After the heat‑loss survey, we’ll advise if any radiators, pipework, electrics or hot‑water cylinder need upgrading so the system can run efficiently at lower flow temperatures.
How noisy is the outdoor unit and where will it be installed?
Modern heat pumps are designed to be quiet and must meet UK noise regulations; we’ll position the unit to minimise any impact on you and your neighbours and comply with local planning rules.
What warranties, servicing and aftercare do you provide?
You’ll get manufacturer warranties on the heat pump plus our workmanship guarantee, and we offer ongoing servicing and support to keep your system performing at its best.
What running costs and savings can I realistically expect compared to my current boiler?
We’ll estimate your likely annual running costs and potential savings based on your current fuel type, insulation level and tariffs, using real‑world performance data rather than lab figures.
Boiler Upgrade Scheme
Up to £7,500
off your heat pump installation
This installer handles the full BUS grant application — deducted directly from your quote. No upfront payment needed for the grant amount.
Scheme open until 2028 — limited funding available
Check your eligibilityReady to get a quote from Pennine Electrical Solutions Ltd?
Free, no obligation — we'll connect you directly
Similar to Pennine Electrical Solutions Ltd
