Is this your business? Claim this free listing to add your details, photos and start receiving enquiries.

Claim this listing
HL

H2o (nw) Limited

MCS Certified
Unit 13, Haydock Cross Kilbuck Lane, Haydock, St Helens, Merseyside, WA11 9WG
Air Source specialist36 reviewsServes 12 regions

4.9

36 Google reviews

1–2 days

Typical install time

About H2o (nw) Limited

H2o (nw) Limited is an MCS certified air source installer based in Merseyside.

System typesAir Source

Coverage area

Map coming soon

Based in Merseyside, WA11 9WG

Areas served:

North WestNorth EastLondonEast MidlandsWest MidlandsEast of EnglandSouth EastSouth WestYorkshireScotlandWalesNorthern Ireland

Reviews

4.9

36 Google reviews

Based on verified Google reviews

C

Cloughmeister

6 years ago

Ziad's service was excellent. He found & fixed the fault quickly and offered some informative and pragmatic advice. We will be inviting Ziad and his company back in the new year to advise on a replacement boiler in conjunction with a kitchen renovation project. In addition he was here on a very timely basis and extremely polite.

K

KallKwik Chiswick

6 years ago

Great Local Company. We have used Ziad now for 3 years. Its very useful in the fact he does Commercial and Domestic work which is hard to find. The jobs have always been completed on time and to our complete satisfaction . For what he doers the prices are very reasonable. Highly recommended.

C

Carolyn Todd

3 months ago

I feel confident the new boiler will last for years.

M

Mark De Souza

2 years ago

Ziad, helped with my boiler which was an old one at short notice. I was grateful for his advice. Very professional and knowledgeable. Will hope to use him again. Recommend him highly.

A

Alicja London

2 years ago

Ziad was very helpful with a tricky plumbing problem. Very professional and knowledgeable in his field. Also quick responses, even over the weekends.

Showing 5 of 36 reviews. View all on Google

Frequently asked questions

How do I know you’re properly qualified and certified to install heat pumps?

We are MCS‑certified and registered with an approved consumer protection/competent person scheme, which is essential for quality assurance and to access grants like the Boiler Upgrade Scheme (BUS).

Can you tell me if a heat pump is actually suitable for my home?

We carry out a detailed home assessment, including property type, insulation levels, existing heating system and available outdoor space, to confirm whether a heat pump is a good fit.

What type and size of heat pump will you recommend for my property, and why?

We design the system using a heat‑loss calculation for your home, then match the correct kW size and model (for example, air‑source vs ground‑source) so it runs efficiently and reliably.

What will the full installation cost be, and what’s included in your quote?

Our fixed quote clearly lists the heat pump, cylinder, controls, labour, scaffolding (if needed), electrical work and any radiator or pipework upgrades, so you know exactly what you’re paying for.

Can you help me access government grants like the Boiler Upgrade Scheme?

Yes, as an MCS installer we can confirm your eligibility, apply for the BUS grant (worth up to £7,500) on your behalf and deduct it directly from your quote.

How much disruption should I expect during installation, and how long does it take?

A typical air‑source heat pump installation takes around 2–5 days, and we’ll agree locations for the indoor and outdoor units, manage any planning considerations and keep you informed each day.

Will I need to replace my radiators or upgrade anything else in my home?

After the heat‑loss survey, we’ll advise if any radiators, pipework, electrics or hot‑water cylinder need upgrading so the system can run efficiently at lower flow temperatures.

How noisy is the outdoor unit and where will it be installed?

Modern heat pumps are designed to be quiet and must meet UK noise regulations; we’ll position the unit to minimise any impact on you and your neighbours and comply with local planning rules.

What warranties, servicing and aftercare do you provide?

You’ll get manufacturer warranties on the heat pump plus our workmanship guarantee, and we offer ongoing servicing and support to keep your system performing at its best.

What running costs and savings can I realistically expect compared to my current boiler?

We’ll estimate your likely annual running costs and potential savings based on your current fuel type, insulation level and tariffs, using real‑world performance data rather than lab figures.

Get a Free Quote Request a Callback

Free, no obligation quote

Verified credentials
NAPIT Registered
Quick facts
Regions covered12 areas

Ready to get a quote from H2o (nw) Limited?

Free, no obligation — we'll connect you directly

Get a Free Quote

Similar to H2O (NW) Limited

Favicon

 

  
  
Favicon

 

  
  
Favicon