Is this your business? Claim this free listing to add your details, photos and start receiving enquiries.

Claim this listing
QL

QTS Contracts Ltd

MCS Certified
27 Riverview Business Park, Perth, Perth and Kinross, PH2 8DF
Air Source specialist19 reviewsServes 12 regions

4.4

19 Google reviews

1–2 days

Typical install time

About QTS Contracts Ltd

QTS Contracts Ltd is an MCS certified air source installer based in Perth and Kinross.

System typesAir Source

Coverage area

Map coming soon

Based in Perth and Kinross, PH2 8DF

Areas served:

North WestNorth EastLondonEast MidlandsWest MidlandsEast of EnglandSouth EastSouth WestYorkshireScotlandWalesNorthern Ireland

Reviews

4.4

19 Google reviews

Based on verified Google reviews

A

Anne Bunting

2 weeks ago

QTS fast tracked my need to remove the bath and install a shower in readiness for my husband’s discharge from hospital. Plumber and Joiner were exceptional and the work was completed in a day. Five stars are well deserved.

B

Brian O'Neill

a year ago

We had a replacement Heat Pump (ASHP), installed by QTS and the service was nothing less than outstanding. The ASHP was fitted in just 1 day as the engineers worked tirelessly even right through very rainy conditions at times. We did encounter some initial issues integrating the new ASHP with our existing internal electrical control system, however this was not the direct fault of QTS. I sent an email to QTS at 6.30am one morning to let them know that the system had failed just after installation and at 8.15am the same morning I had the Operations Director, a heating engineer and an electrician arrive to troubleshoot the issue which was resolved within the hour. You just don't receive service like this anymore! From the initial reply to my enquiry, subsequent site inspection and instal it was just around 3 weeks, so you don't need to wait months for your install, unlike many of the other companies I contacted (15 in all with a 50mile radius of Perth). You should also be aware that QTS are very competitive priced without compromising on the quality of the equipment or level of service. We requested a Mitsubishi ASHP which is arguably the best on the market in terms of efficient & reliability, which QTS were happy to supply. This review should save you hours of work in contacting lots of suppliers, waiting for them to get back to you, organising site visits, waiting on quotations, researching the best supplier etc. So if you are considering having an ASHP installed, which I would highly recommend, then you must use QTS as it impossible to find a better installer!

P

Paula Kerr

5 years ago

Luxurious bathroom instal, very professional at all times, kept fully up to speed on works completed and the forecast for future works. Very tidy cleaned up every day and laid protective coverings for the carpets and flooring that they were accessing. The various tradesmen were extremely friendly and the final outcome was outstanding, very pleased indeed and would highly recommend QTS for all your home renovations and future works.

C

Cliff Nairn

5 years ago

I have had QTS suppy and fit new kitchen worktops and sink and install a new shower and water tank. Both installations were carried out very proffesionally without any issues. Very reliable and helpful and would not hesitate to recommend for both quality of work and excellent value.

M

Michael Mclellan

3 years ago

In my opinion, the whole team who were involved in the refurb of my flat has been second to none. I'd recommend Q T S Contracts Ltd for their expertise and professionalism. The level of workmanship, mannerism and respect was welcomed and very much appreciated. Thank you ALL so very much, but I'd especially like to thank Almo, the painter, for the absolutely beautiful finish and leaving my flat looking so warm and comfortable for myself and my family. Thank you ALL again.

Showing 5 of 19 reviews. View all on Google

Frequently asked questions

How do I know you’re properly qualified and certified to install heat pumps?

We are MCS‑certified and registered with an approved consumer protection/competent person scheme, which is essential for quality assurance and to access grants like the Boiler Upgrade Scheme (BUS).

Can you tell me if a heat pump is actually suitable for my home?

We carry out a detailed home assessment, including property type, insulation levels, existing heating system and available outdoor space, to confirm whether a heat pump is a good fit.

What type and size of heat pump will you recommend for my property, and why?

We design the system using a heat‑loss calculation for your home, then match the correct kW size and model (for example, air‑source vs ground‑source) so it runs efficiently and reliably.

What will the full installation cost be, and what’s included in your quote?

Our fixed quote clearly lists the heat pump, cylinder, controls, labour, scaffolding (if needed), electrical work and any radiator or pipework upgrades, so you know exactly what you’re paying for.

Can you help me access government grants like the Boiler Upgrade Scheme?

Yes, as an MCS installer we can confirm your eligibility, apply for the BUS grant (worth up to £7,500) on your behalf and deduct it directly from your quote.

How much disruption should I expect during installation, and how long does it take?

A typical air‑source heat pump installation takes around 2–5 days, and we’ll agree locations for the indoor and outdoor units, manage any planning considerations and keep you informed each day.

Will I need to replace my radiators or upgrade anything else in my home?

After the heat‑loss survey, we’ll advise if any radiators, pipework, electrics or hot‑water cylinder need upgrading so the system can run efficiently at lower flow temperatures.

How noisy is the outdoor unit and where will it be installed?

Modern heat pumps are designed to be quiet and must meet UK noise regulations; we’ll position the unit to minimise any impact on you and your neighbours and comply with local planning rules.

What warranties, servicing and aftercare do you provide?

You’ll get manufacturer warranties on the heat pump plus our workmanship guarantee, and we offer ongoing servicing and support to keep your system performing at its best.

What running costs and savings can I realistically expect compared to my current boiler?

We’ll estimate your likely annual running costs and potential savings based on your current fuel type, insulation level and tariffs, using real‑world performance data rather than lab figures.

Get a Free Quote Request a Callback

Free, no obligation quote

Verified credentials
Quick facts
Regions covered12 areas

Ready to get a quote from QTS Contracts Ltd?

Free, no obligation — we'll connect you directly

Get a Free Quote

Similar to QTS Contracts Ltd

Favicon

 

  
  
Favicon

 

  
  
Favicon

 

  
  
QTS Contracts Ltd | MCS Certified Heat Pump Installer in North West, North East | Heat Pump Installer Directory