Is this your business? Claim this free listing to add your details, photos and start receiving enquiries.

Claim this listing
GL

Glenavon Plumbing & Heating Ltd

MCS Certified
Unit 2 Barr Thomson Business Park, Queens Drive, Kilmarnock, Ayrshire, KA1 3XL
Air Source specialist13 reviewsServes 1 regions

2.2

13 Google reviews

1–2 days

Typical install time

About Glenavon Plumbing & Heating Ltd

Glenavon Plumbing & Heating Ltd is an MCS certified air source installer based in Ayrshire.

System typesAir Source

Coverage area

Map coming soon

Based in Ayrshire, KA1 3XL

Areas served:

Scotland

Reviews

2.2

13 Google reviews

Based on verified Google reviews

J

Jet

2 months ago

Contractor for keepmoat in Paisley (Abbotsway) had a leak in all my sinks, bath leaked and now overflow in my sink is leaking, not to mention the trap in my en-suite sink has been incorrectly fitted, cowboys

C

Colette Kearney

a year ago

I've had Glenavon plumbing out a few times with issues regarding my new build. Each time Ian has attended and fixed the issue first time. He is a credit to the team and goes above and beyond to help customers. I'm always glad when he chaps the door as I know the job will be done properly

p

paul kerr

2 years ago

These cowboys were used by Miller homes as their plumbing contractor when building my new house. So far I have had a leak in my ceiling that they tore to shreds trying to trace it. Even the guy that came to patch up my ceiling was livid at the mess they had made. The wort though is that whoever fitted my mains water supply not only cut the mdpe pipe inser short as i gather they were havind difficulty with getting it fully in but they also cracked the nut on the stopcock and instead of fixing it turned the cracked part round to the back so it wasn't easily seen and this caused 2 separate leaks that ruined the unit it was housed in. Whomever did this has no respect for the work they do and I think you would get a better job done by a real cowboy than this mob. They should be ashamed of the quality of their work.

L

Lisa Shaw

3 years ago

This company are used by Bellway unfortunately. We asked them to come and check a clicking noise in our tap in our bathroom. They pulled the bath panel off and cracked it and broke the plug release/overflow circular handle in our bath. They do not care if they fix the problem or not. Shocking customer service!

K

Kirsty Daly

8 years ago

I’ve had nothing but excellent service from this company, especially from Cammy I think his name was. Always pleasant and cheery. Always goes above and beyond the callout. Even helping a technophobe like me with my heating controls when he’s found and sorted out the leak in my kitchen!

Showing 5 of 13 reviews. View all on Google

Frequently asked questions

How do I know you’re properly qualified and certified to install heat pumps?

We are MCS‑certified and registered with an approved consumer protection/competent person scheme, which is essential for quality assurance and to access grants like the Boiler Upgrade Scheme (BUS).

Can you tell me if a heat pump is actually suitable for my home?

We carry out a detailed home assessment, including property type, insulation levels, existing heating system and available outdoor space, to confirm whether a heat pump is a good fit.

What type and size of heat pump will you recommend for my property, and why?

We design the system using a heat‑loss calculation for your home, then match the correct kW size and model (for example, air‑source vs ground‑source) so it runs efficiently and reliably.

What will the full installation cost be, and what’s included in your quote?

Our fixed quote clearly lists the heat pump, cylinder, controls, labour, scaffolding (if needed), electrical work and any radiator or pipework upgrades, so you know exactly what you’re paying for.

Can you help me access government grants like the Boiler Upgrade Scheme?

Yes, as an MCS installer we can confirm your eligibility, apply for the BUS grant (worth up to £7,500) on your behalf and deduct it directly from your quote.

How much disruption should I expect during installation, and how long does it take?

A typical air‑source heat pump installation takes around 2–5 days, and we’ll agree locations for the indoor and outdoor units, manage any planning considerations and keep you informed each day.

Will I need to replace my radiators or upgrade anything else in my home?

After the heat‑loss survey, we’ll advise if any radiators, pipework, electrics or hot‑water cylinder need upgrading so the system can run efficiently at lower flow temperatures.

How noisy is the outdoor unit and where will it be installed?

Modern heat pumps are designed to be quiet and must meet UK noise regulations; we’ll position the unit to minimise any impact on you and your neighbours and comply with local planning rules.

What warranties, servicing and aftercare do you provide?

You’ll get manufacturer warranties on the heat pump plus our workmanship guarantee, and we offer ongoing servicing and support to keep your system performing at its best.

What running costs and savings can I realistically expect compared to my current boiler?

We’ll estimate your likely annual running costs and potential savings based on your current fuel type, insulation level and tariffs, using real‑world performance data rather than lab figures.

Get a Free Quote Request a Callback

Free, no obligation quote

Verified credentials
NICEIC Approved
Quick facts
Regions covered1 areas

Ready to get a quote from Glenavon Plumbing & Heating Ltd?

Free, no obligation — we'll connect you directly

Get a Free Quote

Similar to Glenavon Plumbing & Heating Ltd

Favicon

 

  
  
Favicon

 

  
  
Favicon