Is this your business? Claim this free listing to add your details, photos and start receiving enquiries.

Claim this listing
HL

Holme Plumbing and Heating LTD

MCS Certified BUS Registered
36 Seagrave Road, Sileby, Loughborough, Leicestershire, LE12 7TP
Air Source specialistBUS grant eligible12 reviewsServes 12 regions

5.0

12 Google reviews

1–2 days

Typical install time

£7,500

BUS grant amount

About Holme Plumbing and Heating LTD

Holme Plumbing and Heating LTD is an MCS certified air source installer based in Leicestershire. They are registered with the Boiler Upgrade Scheme, meaning they can help you claim up to £7,500 towards your installation.

System typesAir Source
BUS grant handledYes

Coverage area

Map coming soon

Based in Leicestershire, LE12 7TP

Areas served:

North WestNorth EastLondonEast MidlandsWest MidlandsEast of EnglandSouth EastSouth WestYorkshireScotlandWalesNorthern Ireland

Reviews

5.0

12 Google reviews

Based on verified Google reviews

S

Steven “365Fan” Howe

4 months ago

Heat Pump installation by Heat Geek/Jason Holme and team Reassuring, enthusiastic and knowledgeable team. Everyone involved was friendly, professional and clearly very competent. Their attention to detail was excellent, and I was kept fully updated throughout the installation. This was quite a major renovation — all pipework and radiators were replaced, and the old cylinder was removed. My previous system was a 40-year-old boiler with just three radiators. The biggest issue was downstairs: only one radiator, topped up by a gas fire and a gas convector heater. After researching heat pumps online, it became clear that the quality of the installation is just as important as the heat pump itself. During the heat-loss calculations, Jason gave useful tips on reducing heat loss. He spent a good couple of hours going through everything. The prep work lasted about a day with Jason and Adam removing the old boiler and cylinder and fitting the new Heat pump. Tom the electrician spent about a day also spotted some faulty wiring that had been left behind from a previous solar installation. The resulting system is excellent: All pipework is neat and well-lagged Everything was tidied up afterwards The house is now comfortably warm all day Every room holds an even temperature — something that definitely wasn’t the case before I would definitely recommend a Heat Geek installation. They guarantee a SCOP of over 3.5, and their ethos of training existing heating engineers really shows — the installer clearly had the right level of experience. Overall, I felt completely in safe hands from start to finish.

d

dave blatchford

11 months ago

Brilliant service from Jason at Holme Plumbing. Im so glad I found him to do my Heat Pump installation and Plumbing. I had other large companies quote for the work but wasn't convinced that they had my interest at heart. Dealing with Jason has been a pleasure. Quality work with committed aftersales support. 5 star!

g

gwen ward

11 months ago

Jason guided me through the replacement of an old and inefficient heating system - totally inadequate for the property. He designed the heating system and installed an ASHP. Jason did a great job, incredibly knowledgeable, nothing too much trouble. Always happy to help if I have any questions. Highly recommend him.

S

Stephen McCarthy

10 months ago

Jason recently replaced our old combi boiler. He was able to advise regarding which model we needed and was very understanding in finding us a programmer which suited our needs. Work was done quickly and efficiently and I have every confidence in recommending him.

D

Dominic Boston

11 months ago

Jason did a fantastic job installing our heat pump and specifying our underfloor heating. He is a kind and genuinely caring guy, I would thoroughly recommend.

Showing 5 of 12 reviews. View all on Google

Frequently asked questions

How do I know you’re properly qualified and certified to install heat pumps?

We are MCS‑certified and registered with an approved consumer protection/competent person scheme, which is essential for quality assurance and to access grants like the Boiler Upgrade Scheme (BUS).

Can you tell me if a heat pump is actually suitable for my home?

We carry out a detailed home assessment, including property type, insulation levels, existing heating system and available outdoor space, to confirm whether a heat pump is a good fit.

What type and size of heat pump will you recommend for my property, and why?

We design the system using a heat‑loss calculation for your home, then match the correct kW size and model (for example, air‑source vs ground‑source) so it runs efficiently and reliably.

What will the full installation cost be, and what’s included in your quote?

Our fixed quote clearly lists the heat pump, cylinder, controls, labour, scaffolding (if needed), electrical work and any radiator or pipework upgrades, so you know exactly what you’re paying for.

Can you help me access government grants like the Boiler Upgrade Scheme?

Yes, as an MCS installer we can confirm your eligibility, apply for the BUS grant (worth up to £7,500) on your behalf and deduct it directly from your quote.

How much disruption should I expect during installation, and how long does it take?

A typical air‑source heat pump installation takes around 2–5 days, and we’ll agree locations for the indoor and outdoor units, manage any planning considerations and keep you informed each day.

Will I need to replace my radiators or upgrade anything else in my home?

After the heat‑loss survey, we’ll advise if any radiators, pipework, electrics or hot‑water cylinder need upgrading so the system can run efficiently at lower flow temperatures.

How noisy is the outdoor unit and where will it be installed?

Modern heat pumps are designed to be quiet and must meet UK noise regulations; we’ll position the unit to minimise any impact on you and your neighbours and comply with local planning rules.

What warranties, servicing and aftercare do you provide?

You’ll get manufacturer warranties on the heat pump plus our workmanship guarantee, and we offer ongoing servicing and support to keep your system performing at its best.

What running costs and savings can I realistically expect compared to my current boiler?

We’ll estimate your likely annual running costs and potential savings based on your current fuel type, insulation level and tariffs, using real‑world performance data rather than lab figures.

Get a Free Quote Request a Callback

Free, no obligation quote

Verified credentials
NAPIT Registered
BUS Registered
Quick facts
Regions covered12 areas

Boiler Upgrade Scheme

Up to £7,500

off your heat pump installation

This installer handles the full BUS grant application — deducted directly from your quote. No upfront payment needed for the grant amount.

Scheme open until 2028 — limited funding available

Check your eligibility

Ready to get a quote from Holme Plumbing and Heating LTD?

Free, no obligation — we'll connect you directly

Get a Free Quote

Similar to Holme Plumbing and Heating LTD

Favicon

 

  
  
Favicon

 

  
  
Favicon