Is this your business? Claim this free listing to add your details, photos and start receiving enquiries.
Claim this listing4.6
14 Google reviews
1–2 days
Typical install time
Hergreen Ltd is an MCS certified air source and exhaust air installer based in n/a.
Based in n/a, HR8 2UQ
Areas served:
4.6
14 Google reviews
Based on verified Google reviews
Chrissie (Christina)
Nick installed an air source heat pump split ac system in a small badly insulated old cottage, I was concerned it wouldn’t be up to heating it since it’s old, stone, damp etc but I’m delighted it has worked a treat. It now costs about £2.80 a day to heat instead of £10 a day previously. I’m absolutely delighted. Everything was top notch, the service, knowledge, and instructions on how to use it. Recommend
George Layton
Eggleton Engery have completed numerous projects for us over the last few years, including: - Full rewire, plumbing, underfloor heating, boiler, bathroom, network cabling, speaker and external wiring of 2 Bedroom Bungalow. - Dual aircon system in commercial offices. - Air source heat pump, radiators, home office wiring for our new home. 10/10 service, product knowledge and attention to detail.
Harriet Turner
Eggleton Energy installed an air source heat pump in our offices. They were quick and efficient, very quick to respond and no interruption to our business. Can highly recommend.
Rebecca Coady
I contracted Hergreen Ltd to carry out all electrical and plumbing work on my Grade II home. They were incredibly knowledgeable, especially working on the complete refurbishment of a 64 room house. They rewired and re-piped the property and installed a whole new biomass system. I wouldn't hesitate to recommend them, and looking forward to working with them again.
Dave Prosser-Painting
We recently built a granny house in our garden and Nick was a one-stop shop for the full electrical installation, plumbing, under floor heating and heat pump installation. Nick was very accommodating throughout and extremely knowledgeable. He was very forthcoming with information and was able to answer our questions and queries straight off the top of his head. His work was quick, accurate and very tidy. I have also seen examples of his good work in other buildings (including a restoration) nearby to my area. Nick went above and beyond to come back to the site several times to resolve some problems - often well outside what I consider to be normal contractor working hours.
Showing 5 of 14 reviews. View all on Google
We are MCS‑certified and registered with an approved consumer protection/competent person scheme, which is essential for quality assurance and to access grants like the Boiler Upgrade Scheme (BUS).
We carry out a detailed home assessment, including property type, insulation levels, existing heating system and available outdoor space, to confirm whether a heat pump is a good fit.
We design the system using a heat‑loss calculation for your home, then match the correct kW size and model (for example, air‑source vs ground‑source) so it runs efficiently and reliably.
Our fixed quote clearly lists the heat pump, cylinder, controls, labour, scaffolding (if needed), electrical work and any radiator or pipework upgrades, so you know exactly what you’re paying for.
Yes, as an MCS installer we can confirm your eligibility, apply for the BUS grant (worth up to £7,500) on your behalf and deduct it directly from your quote.
A typical air‑source heat pump installation takes around 2–5 days, and we’ll agree locations for the indoor and outdoor units, manage any planning considerations and keep you informed each day.
After the heat‑loss survey, we’ll advise if any radiators, pipework, electrics or hot‑water cylinder need upgrading so the system can run efficiently at lower flow temperatures.
Modern heat pumps are designed to be quiet and must meet UK noise regulations; we’ll position the unit to minimise any impact on you and your neighbours and comply with local planning rules.
You’ll get manufacturer warranties on the heat pump plus our workmanship guarantee, and we offer ongoing servicing and support to keep your system performing at its best.
We’ll estimate your likely annual running costs and potential savings based on your current fuel type, insulation level and tariffs, using real‑world performance data rather than lab figures.
Ready to get a quote from Hergreen Ltd?
Free, no obligation — we'll connect you directly